8MM GLASS PLACE / CHANNEL OPENING CUTTER - SAP 6MM

8MM GLASS PLACE / CHANNEL OPENING CUTTER - SAP 6MM

Manufactured using tungsten diamond tip.
Choose the width by taking into account the tolerance measurements according to the width of the channel you will open.
If the channel to be opened is long
Let's give an example, if you are going to place a 6mm material in the channel to be opened.
And if the length of this material is a large size like 1 meter
It is useful to open the channel as large as 6.5 mm!
Otherwise, the material will not be able to pass through the channel you are opening because it is too large!

8MM GLASS PLACE / CHANNEL OPENING MILLING CUTTER

General features
Handle - 6mm
Handle length - 50mm
Cutting length [CHANNEL WIDTH] - 8mm
Bearing diameter - 13mm
Depth of the channel to be opened - 10.5mm

When using the product, make sure that the entire shaft [handle] is inserted into the pliers. Otherwise, it will pose a risk because the handle size of the product is thin!

It opens a depth of 10.5 mm with the bearing on it, if you wish, you can reduce the depth by installing a larger bearing.